Multiboot USB with Gandalf’s Win10 PE & Install as Windows Boot Menu

2 Comments

Windows PE distributions are mini-Windows operating systems that one can run from a USB flash memory stick. They are extremely handy particularly when fixing a broken Windows system. I just fixed a PC suffering from a Blue Screen of death by using one.

Other Posts Worth Reading
Freedom from Ads with Pi-Hole and Macvlan

At the moment, one of the most handy Windows PE distributions is Gandalf’s Win10 PE Redstone. This “Redstone” distribution packs about 4GB of very useful programs and a fully functional super smooth version of Windows 10 into one ISO that can be installed on and booted from a USB drive.

Having this available on a bootable USB stick if anything goes wrong on your windows system is SUPER handy and has saved me countless times.

This tutorial will show you how to build a multi-boot USB stick that will add Gandalf’s Win10 PE distro but is also capable of adding additional operating systems on the same stick. In addition it will show you how to install Gandalf’s Win10 PE on your boot menu. So if your Windows system goes south you have a very useful toolkit available as an option on the boot screen without even needing your USB stick. This tutorial was done using Windows 10 but the steps should be similar for Windows 7 and 8.

Part I Installing Gandalf PE on a Multiboot Yumi USB

  1. Make sure you have at least an 8 GB USB Flash thumb drive that you are ok with reformatting and destroying all data on.

  2. Download Yumi Multiboot
  3. Download the latest Gandalf distribution (I believe there are several, the larger the size the more programs ) Gandalf’s Windows PE
  4. Startup Yumi. Under Yumi’s Step 1, select the USB drive you are dedicating to Yumi. Under Step 2, select “Single Windows PE” option (located near the bottom under Windows PE Builds). Under step 3 select the Gandalf ISO you downloaded. Yumi should look similar to this:

  5. Click Create and let Yumi go to town. It will take quite a while as it will extract the various programs from the ISO and install them on your USB drive. When it is done it should give you a success message. Close the program and verify that it will boot. If it doesn’t see the troubleshooting in the FAQ and How-To’s on the Yumi page.
  6. To add additional distributions to the USB flash drive (anything from countless Linux distros, bootable Dos systems, to other PE systems, etc. – basically anything Yumi lists in its Step 2) just run Yumi again, select the distro in Step 2 in the Yumi program, and download and install the distro. Very easy.
    NOTE: If you want to add Gandalf’s PE to your Windows boot menu, I recommend adding additional distros only after you complete Part II below.

Part II Installing Gandalf PE to the Windows Boot Menu

WARNING: DO THIS AT YOUR OWN RISK!! In particular, but not without disregarding other things that can go wrong, messing with your BCD files can lead to Blue Screens of death like “Inaccessible Boot Drive” errors. I highly recommend backing up your BCD File and if there are any problems, restore your old BCD. You should be able to do this even if you can’t get into your system again by using the bootable USB drive you created in Part I above.
  1. Create a folder named “Gandalf Rescue PE” on the root of one of your drives (it can be C but preferably another hard drive you have on your system).
  2. Open your USB flash drive and select all the files and folders and click copy:

  3. Now navigate to the folder you created in Part II, Step 1 above, and paste all of the Yumi files and folders into that folder.
  4. Download and install EasyBCD (I used version 2.3). The official site is at Neosmart here (the free/register version works fine), but I downloaded it from Softpedia as the download at the official site was problematic. There’s a free version of EasyBCD for personal use, if commercial use is made, paid versions are available. If you don’t want to use EasyBCD you can use BCDedit (see the example entry below in the last step but I won’t other describe editing with BCDedit as it is too lenghty to go into).
  5. Open EasyBCD (ignore any messages on EFI if you do). Before you do anything backup your existing configuration, by clicking “BCD Backup/Repair” and hitting “Backup settings” after you are satisfied with the path:

  6. Now you’re ready to install Gandalf’s Win10 PE. Click “Add New Entry”. Under “Portable/External Media”, click “WinPE” and under “Type” click “Wim Image (Ramdisk)”. Change the name to “Gandalf’s Win10 PE” and under path, click the browse button and look for the “boot.wim” file found in the “Sources” folder inside the folder your created in Part II, #1 above. Check the box for “EMS Enabled”. Your screen should look something like this:

  7. Click “Add Entry”. Close EasyBCD.
  8. On your PC, open “Startup and Recovery” (type this in your search box) and make sure under “System Startup” the Gandalf distribution is being shown and that there is a delay for “Time to display list of operating systems”:

  9. That’s it. Now reboot and you should see Gandalf’s Win 10 PE show up on your boot screen as an option.
  10. As a final note, if someone desires to manually edit the BCD file using BCDEdit (rather than using EasyBCD),the manual entry looks like this (I don’t have room to explain the below but if you are using bcdedit you should know how to create this entry):

    NOTE ON ABOVE FOR MANUAL BCDEDIT ENTRIES: Substitute your drive letter for “K:” above. Also note the GUID used in the device and osdevice lines are the same as the Identifier GUID.

Fix Disabled or Greyed Out System Restore

Leave a Comment

I checked my system restore settings (in windows 10 just type in search “System restore”) and tried to to turn on System Protection by going into System Properties and clicking the “Configure” button. But my “Turn on System Protection” option was disabled and I was unable to select it :

This puzzled me for a while until I realized I selected a non-system drive and if you do that Windows won’t let you turn on system restore. So I went back to System Properties, System Protection tab and selected my system drive: 

Then when I clicked “Configure” the option to turn on system protection was available:


Simple, but not immediately obvious and wasted some time. The strange thing is also is that once I enabled it for the C drive it then allowed me to enable for non-system drives. Weird. Hope this helps someone.

Extend the Life of Your Micro USB Cable and Fix Your Loose Android Connection

Leave a Comment

Here’s a quick fix if you have a loose micro USB connection (for example of the type that is commonly used to charge Android phones).

Have you ever noticed the 2 prongs on a micro usb connection ? These prongs are used to tighten the hold when that end is inserted into the phone. Thee prongs wear out or bend over time so they no longer serve their intended purpose, resulting in a loose and no longer working connection to your phone.

As a quick fix you can raise the surface of the micro-usb end by applying a drop or two of super glue to create a bump or raised layer which will tighten the fit.

Squeeze a a small drop of superglue on the side of the micro usb end where the prongs are:


Be VERY careful not to let the superglue drip into the phone. Your goal is to have the superglue dry into a “bump” on the surface of the micro usb just enough to tighten the fit into the phone as a substitution for the worn prongs. Do the same to the edges of the micro usb but only a small bit.

Let it DRY for at least one hour. You don’t want wet super glue in your phone! When it is thoroughly dry, reinsert. You should now have a supertight connection!

I have done this several times with success. The same method has worked to fix a loose AC adapter plug on another device (raising the surface with a thin layer of superglue to tighten the fit). Note that this won’t last forever but I’ve found it is good for at least several months and almost as long as the prongs lasted.

WARNING: DO THIS AT YOUR OWN RISK. You could damage your phone if the superglue gets in your phone or inside the micro usb. All liability is disclaimed!!